safety rules

at enkay electricals....

SAFETY RULES FOR ALL THE EMPLOYEES, IRRESPECTIVE OF ANY
LEVEL AND CADRES.

1). It is mandatory for all the employees to participate actively in all the safety       programmes, training sessions etc, which are being organized by the company quite       regularly.

2). Every employee should insist on the observance of all the safety rules by fellow       employees / workers, besides of himself, observing these rules very strictly.

3). On all routine days, before starting any job, ensure that they have secured the       necessary permit verbally and in writing also, for working in the specified area. The       time duration, location of the site and date etc. should be clearly indicated in the       Work Permit. This work Permit is normally issued by the concerned Safety engineer       of the Client. This regulation is observed more strictly in Chemical Plants, Refineries,       functional distilleries and Pharmaceutical Plants etc. In residential, Commercial,       Industrial complexes etc., normally, this regulation is observed only verbally, since       the Client's installations are not likely to get damaged because of any on going       construction activities.

4). Report immediately to the concerned safety engineer of our company / Client also, if       you come across any hazardous and dangerous situation in any of the location at       the site.

5). White closing the work in the evening/ night, clean up all the adjoining areas and       remove all the waste items, which are generated during the course of working.

6). Whenever standing or working near the construction machineries, such as Cranes,       Excavators etc. ensure that you are not very close to these machineries and are       away from the suspended loads etc.

7). Never use defective tools / tackles or any construction implements / equipments.       This may prove dangerous. Handling of the defective tools may cause injuries.

8). Fire extinguishers, hand gloves, safety goggles, aprons etc. should be readily       available at the site and they should be kept and stored at the nearest location       from the working area.

9). While climbing or walking at elevated locations, NEVER carry any loose items such as       Screw drivers / hammers / pliers etc. in the pockets as these items may fall and hit       the workers below. Likewise no tools / tackles etc. should be left unattended at       elevated locations.